PIPE CLAMP FIXTURES

A PONY Clamp Fixutre is one of the handiest tools in any shop. One set of PONY Clamp Fixtures can be used to make any number of different length bar clamps simply by using the fixtures on different lengths of pipe. Heavy-Duty black pipe is recommended. No tools are required for assembly. Simply screw the head assembly onto the pipe threads at one end. Slide the tail-stop onto the pipe at the other end. Then apply the coil-spring stop to the pipe threads at the tail-stop end of the pipe to prevent the tail-stop from sliding off the pipe during adjustment away from the work being clamped.

PONY Clamp Fixtures are interchangeable from one pipe length to another, so one set can serve several needs. (Note: Make sure that the pipe lengths are at least 7" longer than work to be clamped.)

PONY Clamp Fixtures feature the original Multiple-Disc-Clutch design which allows a secure hold at any point along the pipe; no slipping, no pipe crushing..just instant adjustment either toward or away from the work being held. The extended clutch discs are accessible above and below the pipe for easy release. PONY Clamp Fixtures are designed for long life. However, if clutch discs become worn, remove the set from casting, reverse or invert the set to create a new leading edge, then re-insert the clutch discs into the casting.