Medium/Heavy-Duty

JORGENSEN "Body" Clamps
Style 120's come in a range of sizes.

A general-purpose clamp for medium/heavy-duty industrial service. High strength-to-weight ratio. The deep-throat has a unique rounded frame for work clearance at top, back and bottom.

Features:

• heat-treated, perlitic and/or iron deep-throat frames, ribbed to resist side strain with longer frame hubs for assured durability
• machine-ground, extra wide anvils
• cold-drawn steel screws with special smoothly cut Acme threads
• steel sliding-pin handles for secure hold
• exclusive JORGENSEN swivels with steel internal tooth washers for positive stay-on power

Note: This clamp also is available with copper-plated parts for protection against weld spatter. Request individual stock number by using the chart below and adding a "-CP".
 

Stock Number	Opening	Closing	Throat Depth	Extreme Depth	Screw Diameter	Load Limit
122	2"	0	2"	2-3/8"	9/16"	2,500 lbs.
123	3"	0	2-1/4"	2-3/4"	9/16"	4,000 lbs.
124	4"	0	2-1/2"	3-1/8"	5/8"	4,000 lbs.
125	5"	0	3"	3-5/8"	5/8"	4,000 lbs.
126	6"	0	3-1/4"	3-7/8"	5/8"	4,000 lbs.
128	8"	0	3-3/4"	4-1/2"	3/4"	4,000 lbs.
130	10"	2"	4"	4-3/4"	13/16"	5,000 lbs.
132	12"	4"	4-1/4"	5"	13/16"	6,000 lbs.

Style Number 120-CP are available with copper-plated hardware. Just add the "-CP" after the stock number.

 

Home Page    Back to "C" Clamps